Electric window control*
The electric windows can only be operated with the ignition switch in the “ON” position.
Each door window opens or closes while the corresponding switch is pressed.
1- Driver’s door window
2- Front passenger’s door window
3- Rear left door
window
4- Rear right door window
5- Lock switch
WARNING
(1) Before operating the electric window control, make sure that nothing
is capable of being trapped (head, hand, finger, etc.).
(2) Never leave the vehicle
without removing the key.
(3) Never leave a child (or other persons who might
not be capable of safe operation of the electric window control) in the vehicle
alone.
NOTE
Once the battery cable is disconnected, or the fuse is replaced, it may happen that the door glasses cannot be operated normally even after reconnecting the battery cable. In such a case, take the following steps with all the door windows.
Pull the power window switch repeatedly to close the door window completely if it is open. After it is completely closed, pull the switch again for one second, and the door window will resume its normal operation.
See also:
Engine coolant temperature display
This indicates the engine coolant temperature.
If the coolant becomes hot, will
blink.
Pay careful attention to the engine coolant temperature display while you are
driving.
Caution
► ...
Deployment of front air bags
The front air bags ARE DESIGNED TO DEPLOY when...
The front air bags are designed to deploy when the vehicle suffers a moderate
to severe frontal impact. Typical conditions are shown in the illus ...
To adjust the vertical mirror position
It is possible to move the mirror up and down to adjust its position.
To adjust the mirror position
It is possible to move the mirror up/down and left/ right to adjust its position.
...