For pleasant driving
See also:
To change a tyre
1. If a wheel cover is installed, first remove the cover. (Refer to “Wheel covers”.)
Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove
the wheel nuts yet.
2 ...
Headlamps (low beam, except for vehicles with high intensity discharge headlamps)
1. For petrol-powered vehicles equipped with turbocharger, when replacing the
bulb on the left side, remove the bolt (A) holding down the relay box and move the
relay box towards the rear of the v ...
Automatic headlamp levelling
This mechanism automatically adjusts the direction of the headlamps (beam position)
depending on changes in the condition of the vehicle, such as the number of occupants
or luggage weight. When th ...
