Heater/Air conditioning
The heater/air conditioning can only be used while the engine is running.
See also:
Operating the system as an automatic air conditioning
In normal conditions, use the system in the AUTO mode and follow these procedures:
1- Set the blower speed selection dial to “AUT” position.
2- Turn the temperature control dial to set the des ...
Cancelling the alarm
It is possible to halt the activation of an alarm using the following methods:
• Pressing the LOCK or UNLOCK switch on the remote control switch.
(After pressing the LOCK switch, the vehicle will ...
Wheel covers
To removeWrap the tip of the jack bar with a cloth, insert it deeply into
the notch provided in the wheel cover, and pry the cover away from the wheel. Using
the same procedure at the other wheel ...