Vehicle care

See also:

Starting the engine (petrol-powered vehicles)
The starting procedure is as follows: 1. Fasten the seat belt. 2. Make sure the parking brake is applied. 3. Depress and hold the brake pedal. 4. Fully depress the clutch pedal. (M/T) Note υ ...

After driving on icy roads
After driving on snow or icy roads, remove any snow and ice which may have accumulated around the wheels. On vehicles that have an ABS, be careful not to damage the wheel speed sensors (A) or the ...

Operating the heater system
Heating Set the mode selection dial to the position and set the air selection switch (A) to the outside position. Turn the temperature control dial clockwise or anticlockwise to the desired temp ...