General maintenanceGeneral maintenance - Maintenance - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

Fuel, engine coolant, oil and exhaust gas leakage

Look under the body of your vehicle to check for fuel, engine coolant, oil and exhaust gas leaks.

• If you see a suspicious fuel leak or if you smell fuel, do not operate the WARNING

• If you see a suspicious fuel leak or if you smell fuel, do not operate the vehicle; call your MITSUBISHI MOTORS Authorized Service Point for assistance.

Exterior and interior lamp operation

Operate the combination lamp switch to check that all lamps are functioning properly.

If the lamps do not illuminate, the probable cause is a blown fuse or defective lamp bulb. Check the fuses first. If there is no blown fuse, check the lamp bulbs.

For information regarding the inspection and replacement of the fuses and the lamp bulbs, refer to “Fuses” and “Replacement of lamp bulbs”.

If the fuses and bulbs are all OK, we recommend you to have your vehicle checked and repaired.

Meter, gauge and indicator/warning lamps operation

Start the engine and check the operation of all instruments, gauges and indication and warning lamps.

If there is anything wrong, we recommend you to have your vehicle inspected.

Hinges and latches lubrication

Check all latches and hinges, and, if necessary, have them lubricated.

    See also:

    The front airbags and driver’s knee airbag MAY NOT DEPLOY when…
    With certain types of frontal collisions, the vehicle’s body structure is designed to absorb the shock to help protect the occupants from harm. (The vehicle body’s front area may deform signif ...

    Parking brake break-in
    Break-in the parking brake linings whenever the brake performance of the parking brake is insufficient or whenever the parking brake linings and/or discs are replaced, in order to assure the best ...

    Roof drip moulding
    When installing the roof carrier, remove the roof drip moulding caps. 1. Open the cover (A) and remove the screws using a Philips screwdriver. 2. Remove the caps by sliding them. After removal o ...