Height adjustment
Adjust the head restraint height so that the centre of the restraint is as close as possible to eye level to reduce the chances of injury in the event of collision. Any person too tall for the restraint to reach their seated eye level, should adjust the restraint as high as possible.
To raise the head restraint, move it upward. To lower the restraint, move it downward while pushing the height adjusting knob (A) in the direction of the arrow. After adjustment, push the head restraint downward and make sure that it is locked.
See also:
Supplemental restraint system (SRS) - airbag
The information written in this Supplemental Restraint System (SRS) section contains
important points concerning the driver, front passenger, driver’s knee, side and
curtain airbags.
The SRS dr ...
Reference lines on the screen
Reference lines and upper surface of the rear bumper (A) are displayed on the
screen.
► Red line (B) indicates approximately 50 cm behind the rear bumper.
► Two Green lines (C) indicat ...
“ASC OFF” switch
The ASC is automatically activated when the ignition switch is turned to the
“ON” position. You can deactivate the system by pressing down the “ASC OFF” switch
for 3 seconds or longer.
Wh ...