Instruments and controls
See also:
Changing a fuse
1. Before replacing a fuse, always turn off the electrical circuit concerned
and turn the ignition key to the “LOCK” position. 2. Remove the fuse box cover.
3. Referring to the fuse load cap ...
Cautions on handling of 4-wheeldrive vehicles
Tyres and wheels
Since the driving torque can be applied to the 4 wheels, the driving performance
of the vehicle when operating in 4-wheel drive is greatly affected by the condition
of the tyres. ...
Reversing sensor system warning display
In case there is a malfunction in the reversing sensor system, the display for
the malfunctioning sensor will blink and the warning buzzer will sound for approximately
5 seconds. Even after the bu ...