Odometer/Tripmeter
When the ignition switch is turned “ON”, the odometer display is given in the lower display window (1). The upper display window (2) shows the tripmeter A and tripmeter B distances in that sequence. It then shows the distance that was displayed before the ignition switch was last turned to the “OFF”.
Every time the reset button (3) is pressed lightly (less than one second), the upper display is changed as below.
Odometer
The odometer indicates the total distance the vehicle has travelled.
Tripmeter
There are two tripmeters: A and B. These indicate the distance travelled during a particular trip or period.
4– Tripmeter A indicates the distance travelled since the current trip begins.
5– Tripmeter B indicates the distance from an intermediate location.
To return the indication to 0, press the reset button for more than 1 second. Only the currently displayed value will be reset.
NOTE
(1) Display A and B each have a maximum distance of 999.9 mile (km).
(2)
When disconnecting the battery terminal for a long time, the memory of tripmeter
display A and B are cleared, and the display returns to “0”.
See also:
Error codes (iPod)
Vehicles with Link System
If an error code (1) appears in the display, take action in accordance with the
table below.
...
Plastic, vinyl leather, fabric and flocked parts
1. Gently wipe off with gauze or other soft cloth soaked with a 3 % aqueous solution
of neutral detergent.
2. Dip cloth in fresh water and wring out well.
Using this cloth, wipe off the detergent ...
Indication lamp
1. When the ignition switch is turned “ON”, the TCL indication lamp illuminates
and goes out after a few seconds. 2. When SLIP control is exerted while driving,
the TCL indication lamp will il ...