Average fuel consumption
This value shows the average fuel consumption (in L/100 km or mpg) since the display was reset. If you reset the display at the time when you want to start the measurements, average fuel consumption from that point of time can be displayed.
To reset the display
[Vehicles without MITSUBISHI genuine audio]
Push the button (A) for more than 2 seconds.
[Vehicles with MITSUBISHI genuine audio]
Push the “DISP” button for more than 2 seconds.
NOTE
(1) When the ignition switch is turned on, the average fuel consumption which
was being displayed when the ignition switch was previously turned off will be displayed
once again.
(2) Average fuel consumption varies according to the conditions under
which a vehicle is travelling (road conditions, the manner in which the vehicle
is being driven, etc.). Observe this display for reference because the fuel consumption
display may differ from the actual fuel consumption.
See also:
Towing bar mounting specifications
See the following table for fixing points (A) for the towing bar.
1: Vehicles equipped with 16 inch tyres that are without high ground suspensions
2: Vehicles equipped with 18 inchtyres
3: Vehi ...
Outside rear-view mirrors
To adjust the mirror position
The outside rear-view mirrors can be operated when the ignition switch or the
operation mode is in ON or ACC.
WARNING
• Do not attempt to adjust the rear-view mir ...
Hinges and latches lubrication
Check all latches and hinges, and lubricate if necessary by first cleaning and
then applying multipurpose grease. ...