Starting and driving
See also:
Normal conditions
The starting procedure is as follows :
1. Insert the ignition key and fasten the seat belt. 2. Apply the parking brake.
3. Depress and hold the brake pedal. 4. Place the gearshift lever (manual tra ...
Starting and stopping the
Tips for starting
• The operation mode can be in any mode to start the engine.
• The starter motor will be turning for up to approximately 15 seconds if the
engine switch is released at once ...
Introduction of outside air
To introduce air into the vehicle during hot weather, set the air selection switch
(A) to the outside position and set the temperature control dial to the position
shown in the illustration. Be ...