Normal conditions
The starting procedure is as follows :
1. Insert the ignition key and fasten the seat belt.
2. Apply the parking brake.
3. Depress and hold the brake pedal.
4. Place the gearshift lever (manual transmission)
in the “N” (Neutral) or the selector lever (automatic transmission) in the “P” (PARK)
position.
5. Fully depress the clutch pedal (manual transmission).
6. After
turning the ignition key to the “ON” position, make certain that all warning lamps
are functioning properly before starting the engine.
7. Turn the ignition key
to the “START” position without depressing the accelerator pedal, and release it
when the engine starts.
NOTE
A ticking noise may be heard after starting the engine. This is not an abnormal condition. The noise will disappear after a short time of engine running.
If the ticking noise continues after the engine is warmed up, have your vehicle checked at an authorized MITSUBISHI dealer.
See also:
Active stability control (ASC)
The Active Stability Control (ASC) takes overall control of the anti-lock brake
system (ABS), traction control function and stability control function to help maintain
the vehicle’s control and ...
Hazard warning flasher switch
Use the hazard warning flasher switch when the vehicle has to be parked on the
road for any emergency.
The hazard warning flashers can always be operated, regardless of the position
of the igni ...
Cargo loads
Cargo loads precautions
CAUTION
• Do not load cargo or luggage higher than the top of the seatback. Be sure
that your cargo or luggage cannot move once your vehicle is moving. Having the driver ...