Starting the engine (Diesel-powered vehicles)
1. Insert the ignition key and fasten the seat belt.
2. Apply the parking brake.
3. Depress and hold the brake pedal.
4. Place the gearshift lever in the “N” (Neutral)
position.
5. Fully depress the clutch pedal.
6. Turn the ignition key to the
“ON” position. The diesel preheat indication lamp will first illuminate in amber,
and then after a short time go out, indicating that preheating is completed.
7.
Turn the ignition key to the “START” position without depressing the accelerator
pedal, and release it when the engine starts.
NOTE
(1) If the engine is cold, the diesel preheat indication lamp is on for a
longer time.
(2) When the engine has not been started within about 5 seconds after
the diesel preheat indication lamp will go out, return the ignition key to the “LOCK”
position. Then, turn the key to the “ON” position to preheat the engine again.
(3) When the engine is warm, the diesel preheat indication lamp does not come on,
even if the ignition key is placed in the “ON” position.
Start the engine by turning
the ignition key right to the “START” position.
See also:
Tyre inflation pressure
Check the tyre inflation pressure of all the tyres while they are cold: if insufficient
or excessive, adjust to the specified value. After the tyre inflation pressure
has been adjusted, check th ...
How to change a tyre
Before changing a tyre, first stop your vehicle in a safe, flat location.
1. Park the vehicle on level and stable ground, free of loose pebbles, etc.
2. Set the parking brake firmly.
3. On vehicles ...
Folding the seat (Hatchback)
1. Remove the rear shelf panel and rear head restraints. Refer to the description
of “Rear shelf panel” on page NO TAG and “Head restraints” on page 3–7.
2. Pull the band (between the ...