Selector lever operation
Except for vehicles with Sports mode
The transmission has 4 forward gears and 1 reverse gear.
The individual gears are selected automatically, depending on the position of the gear selector lever, the speed of the vehicle and the position of the accelerator pedal.
The selector lever has 7 positions, and is equipped with a lock button (A) to avoid inadvertent selection of the wrong gear.
Button must be pushed
and brake pedal must be depressed to move the lever
Button must be pushed
to move the lever.
Button need not be pushed
to move the lever.
See also:
Position lamps (except for vehicles equipped with high intensity discharge headlamps)
1. For petrol-powered vehicles equipped with turbocharger, when replacing the
bulb on the left side, remove the bolt (A) holding down the relay box and move the
relay box towards the rear of the v ...
Glove box
To open, pull the lever (A).
Note
► The USB input terminal (if so equipped) is located in the glove box. For details,
refer to “USB input terminal”.
Card holder
There is a card hold ...
Caution for installing the child restraint on vehicles with a front
passenger airbag
The label shown here is attached on vehicles with a front passenger airbag.
WARNING
• Extreme Hazard! Do not use a rearward facing child restraint on a seat protected
by an airbag in front of ...