Parking brake
To park the vehicle, first bring it to a complete stop, fully engage the parking brake and then move the gear shift lever to 1st (on an uphill) or Reverse (on a downhill) position, for vehicles with a manual transmission or set the selector lever to “P” (PARK) position on automatic transmission vehicles.
To apply
1- Pull the lever up without pushing the button at the end of the hand grip.
To release
1- Pull the lever up slightly.
2- Push the button at the end of the hand grip.
3- Push the lever downward.
NOTE
To prevent the parking brake from being released unintentionally, the lever must be pulled upward slightly before it can be pushed downward. Simply pressing the button does not enable the lever to be pushed downward.
When parking on a hill, apply the parking brake and turn the front wheels towards the kerb on a downhill grade, away from the kerb on an uphill grade.
CAUTION
Before driving, be sure that the parking brake is fully released and the brake warning lamp is off.
If a vehicle is driven without releasing the parking brake, the brake will be overheated, resulting in ineffective braking and possible brake failure.
See also:
Jacking up the vehicle
1. Park the vehicle on a level and stable ground. 2. Activate the hazard flashers
and turn the ignition key to the “LOCK” position. 3. Set the parking brake firmly,
move the gearshift lever (m ...
Audio system
Type 1- LW/MW/FM digital turning radio with CD player
Type 2- LW/MW/FM digital turning radio with CD changer
For information on operations of the audio system for vehicles equipped with
MITSUBIS ...
Cancelling the alarm
It is possible to halt the activation of an alarm using the following methods:
► Pressing the LOCK or UNLOCK switch on the remote control switch.
(After pressing the LOCK switch, the vehicle ...