Parking
Parking on a slope
Fully engage the parking brake, and then move the gearshift lever to 1st (on an uphill) or reverse (on a downhill) position on manual transmission vehicle. On automatic transmission vehicle, move the selector lever to “P” position. When parking on a hill, apply chocks to wheels for greater safety.
Parking with the engine running
Do not keep the engine running in a closed or poorly ventilated place. Carbon monoxide gas is odorless and extremely poisonous and dangerous.
Where you park
Do not park in a place where there are inflammable objects such as dry grass, leaves, etc... because the exhaust system with catalyst produces very high temperatures. This may cause a fire.
When leaving the vehicle
Always remove the key from the ignition switch and lock all doors when leaving the vehicle unattended.
Always try to park your vehicle in a well lit area.
See also:
Control panel
A- Temperature control dial
B- Air selection switch
C- Blower speed selection dial
D- Air conditioning switch
E- Mode selection dial
F- Rear window demister switch
NOTE
• On vehicles with ...
Coming home light
This function turns on the headlamps in the low beam setting for about 30 seconds
after the ignition switch is turned to the “OFF” position or the operation mode
is put in OFF.
1. Turn the co ...
Changing the function settings (when the ignition switch is “ON”)
1. Stop the vehicle in a safe place.
Firmly apply the parking brake and put the gearshift lever into the “N” (Neutral)
position (M/T), the selector lever into the “P” (PARK) position (CVT) ...