How to adjust the volume
VOL (Volume control)-2
Turn the knob clockwise to increase the volume.
How to adjust the tone
Press the AUDIO button (5) to select BASS TREBLE FADER BALANCE Audio adjust mode off.
BASS (Bass tone control)
Press the audio adjust button (4) either or to select the desired bass tone quality.
TREBLE (Treble tone control)
Press the audio adjust button (4) either or to select the desired treble tone quality.
FADER (Front/rear balance control)
Press the audio adjust button (4) either or to balance the volume of sound from the front and the rear speakers.
BALANCE (Left/right balance control)
Press the audio adjust button (4) either or to balance the volume of sound from the left and the right speakers.
NOTE
Audio adjust mode will be canceled when radio or CD operation is performed or no adjustment is performed for more than 7 seconds.
See also:
Changing the mode selection
To change the position and amount of air flowing from the ventilators, turn the
mode selection dial.
(Refer to “Mode selection dial”.) These symbols are used in the
next several illustrations ...
Normal conditions
The starting procedure is as follows :
1. Insert the ignition key and fasten the seat belt. 2. Apply the parking brake.
3. Depress and hold the brake pedal. 4. Place the gearshift lever (manual tra ...
Operating hints
► Do not let the clutch slip (vehicles equipped with M/T only) and do not increase
the engine speed more than necessary when starting.
► Be sure that the driving speed does not exceed 1 ...