To change the language of PTY display
You can select your favourite language between English, French, German, Swedish, Spanish and Italian.
1. Turn off the radio.
2. Turn the radio back on while holding down the PTY
button (B).
3. An alarm will sound and the system will enter PTY Language Switching
mode.
4. Use the H button (C) or the M button (D) to select the desired language.
Press the SET button (E) to register your selection.
5. Press the button on the
left (A) to cancel the selection. The system will revert to the settings prior to
accessing PTY Language Switching mode.
See also:
Window glass
The window glass can normally be cleaned using only a sponge and water.
Glass cleaner can be used to remove oil, grease, dead insects, etc. After washing
the glass, wipe dry with a clean, dry, soft ...
Interrupt display screen (when the ignition switch or the operation mode is
ON)
Warning display
When there is information to be announced, such as a system fault, a sound is
emitted and the information screen switches to the warning display screen.
Refer to the warning list a ...
Going & Stopping
The Lancer Sportback's 168-horsepower, 2.4-liter four-cylinder engine offers
energetic acceleration that should satisfy all but the most power-hungry
drivers. For them, Mitsubishi offers a Ralliar ...