To listen to a CD [With a CD player]
1. Insert the disc with the label facing upward. When a disc is inserted, the
CD player will begin playing even if the radio or tape player is being used.
The
CD player will also start the playback when the CD button (3) is pressed with a
disc in the player even if the radio or tape player is being used.
NOTE
If the system is equipped with CD autochanger, the system operation is changed over from the CD player mode to the CD autochanger mode and vice versa each time the CD button (3) is pressed.
2. To adjust the volume and tone, refer to the section “How to adjust the volume”
and “How to adjust the tone” on page 6–17.
3. When the CD eject button (5) on
the CD player is pressed, the disc will automatically stop and be ejected.
4.
When a 3-inch compact disc is used, playback can be made without using the adapter.
Insert the disc about in the centre of the discloading slot.
5. For information
concerning the handling of compact discs, refer to the section “Handling of compact
discs” on page 6–27.
See also:
Digital clock
Automatic mode and manual mode are available for digital clock adjustment.
Select the automatic mode or the manual mode by performing the following operations:
1. Press the PWR switch (A) to turn ...
Not Too Quick
The four-cylinder provides adequate, if noisy, power. A continuously variable
automatic transmission is standard; it's not the quickest responder around town,
taking its time to gin up the proper ...
Windscreen wipers
Type 1
- Misting function. The wipers
will operate once. - Off
- Intermittent operation at intervals
of approximately 4 seconds –Slow
–Fast
Type 2
- Misting function. The wipers wil ...