Servicing of plastic parts
Use a sponge or chamois leather. If a car wax adheres on a grey or black rough surface of the bumper, moulding or lamps, the surface becomes white. In such a case, wipe it off using lukewarm water and soft cloth or chamois leather.
CAUTION
(1) Do not use a scrubbing brush or other hard tools as they may damage
the plastic part surface.
(2) Do not use wax containing compound (polishing powder)
which may damage the plastic part surface.
(3) Do not bring the plastic parts
into contact with brake fluids, engine oils, greases, paint thinners, painting,
and sulphuric acid (battery electrolyte) which may stain, or discolour the plastic
parts. If they touch the plastic part, wipe them off with soft cloth, chamois or
the like and an aqueous solution of neutral detergent, then immediately rinse the
affected parts with water.
See also:
Door ajar warning display screen (when the ignition switch is “ON”)
If any of the doors or the rear hatch is not completely closed, this displays
the open door or rear hatch.
If the vehicle speed exceeds approximately 8 km/h (5 mph) while a door is ajar,
a buzz ...
SRS warning lamp/display
Warning lamp
The warning lamp/display illuminates when there is a fault with the system. In
addition, the warning display will be displayed on the information screen in the
multi-information di ...
Trailer towing
In order to tow a trailer with your vehicle, a trailer towing device that meets
all relevant regulations in your area has to be mounted. The regulations concerning
the towing of a trailer may diff ...