Mitsubishi Lancer

See also:

Reference lines on the screen
Reference lines and upper surface of the rear bumper (A) are displayed on the screen. ► Red line (B) indicates approximately 50 cm behind the rear bumper. ► Two Green lines (C) indicat ...

Front turn-signal lamps
1. Remove the clips (A) and clips (B), then remove the duct (C) and the upper cover (D). 2. Remove the entire socket and bulb assembly (E) by turning it anticlockwise. : Front of the vehicle ...

Operating hints
(1) Do not let the clutch slip (vehicles with a manual transmission only) and do not increase the engine speed more than necessary when starting. (2) Be sure that the driving speed does not exce ...