Tools and jack

The storage location of the tools and jack should be remembered in case of an emergency.
Location
1- Tools
2- Jack

Tools
1- Tool bag
2- Wheel nut wrench
3- Bar

Jack
1- To remove
Turn the shaft end so that the jack retracts and detach it from fixing bracket (A).
2- To store
Turn the shaft end by hand to expand the jack until it is secured firmly in position.
See also:
Corner and back sensor locations
There are two corner sensors (A) at the corners of the rear bumper, and two back
sensors (B) in the centre of the rear bumper.
...
To adjust height
Adjust the head restraint height so that the centre of the restraint is as close
as possible to eye level to reduce the chances of injury in the event of collision.
Any person too tall for the rest ...
Active Stability Control (ASC) OFF display screen
This is displayed when the Active Stability Control (ASC) is turned off with
the ASC OFF switch.
If there is a fault with the ASC, the ASC OFF display is shown.
Refer to ““ASC OFF” switch ...
