To install
Align the tyre valve with the valve opening provided on the wheel cover.
Then tap around the outer edge of the wheel cover with your hand to secure it in place.
NOTE
Full wheel covers have a symbol mark provided on the reverse side to show the air valve location.
Before installing the wheel cover to the wheel, make sure that the opening with the symbol mark is correctly aligned with the air valve.
See also:
Water temperature gauge
The water temperature gauge indicates the engine coolant temperature when the
ignition switch is “ON”.
CAUTION
If the indication needle enters the overheating zone while the engine is
runn ...
Bottle holder
Caution
► Do not drink beverages while driving the vehicle; doing so could distract
you and result in an accident.
► Beverages can spill due to vibration or other movement during vehi ...
Gearshift lever operation
The Twin Clutch SST has 6 forward gears and 1 reverse gear.
The individual gears are selected automatically, depending on the position of
the gearshift lever, the speed of the vehicle and the posit ...