Bleeding the fuel system (diesel-powered vehicles only)
The fuel system should be bled to remove air as described below if the fuel supply is exhausted during travel.
1. Undo the four clips on the air cleaner and push the cover (B) aside.
2. Press the pump (A) against the bracket (C) with your fingers until the pump becomes stiff. Then pump several times more to pressurize the system.
3. Finally, start the engine and check for leakage of fuel. If in doubt, consult your nearest authorized MITSUBISHI dealer.
CAUTION
(1) Do not smoke or have any other open flame near the vehicle while bleeding
the fuel system.
(2) Be sure to carefully clean away any spilt fuel which could
ignite and cause a fire.
See also:
Cargo loads precautions
Caution
► Do not load cargo or luggage higher than the top of the seatback. Be sure
that your cargo or luggage cannot move once your vehicle is moving.
Having the driver’s vision blocked, ...
Display brightness adjustment / Display unit selection
Display brightness adjustment
1. Press the “H” button while pressing the button (A) to activate the display
brightness selection function.
2. Adjust the brightness by moving the cursor with ...
Wiper blade rubber replacement
Windscreen wiper blades
1. Lift the wiper arm off the windscreen.
2. Pull the wiper blade until its stopper (A) disengages from the hook (B). Pull
the wiper blade further to remove it.
NOTE
...