Front turn–signal lamps
Petrol–powered vehicles, Diesel–powered vehicles (right side)
Turn the bulb socket anticlockwise to remove. And remove the bulb from the socket by turning anticlockwise while pressing it inward.
Diesel–powered vehicles (left side)
1. Remove the cover.
2. Turn the bulb socket anticlockwise to remove it. And remove the bulb from the socket by turning anticlockwise while pressing it inward.
See also:
On a flooded road
(1) Avoid flooded roads. Water could enter the brake discs, resulting in temporarily
ineffective brakes. In such cases, lightly depress the brake pedal to see if the
brakes operate properly. If th ...
Headlamps (high-beam, except for vehicles with high intensity discharge headlamps)
1. When replacing the bulb on the right side of the vehicle, remove the bolt
(A) holding down the washer tank spout and move the spout towards the rear of the
vehicle.
: Front of the vehicle
2 ...
Operation of the Dead Lock System
In a vehicle that has a Dead Lock System, it is possible to set the Dead Lock
System using the remote controller.
(Refer to “Dead Lock System”.) ...