Front fog lamps
Remove the cover mounting screw.
Remove bolts (1) and (2) with a screwdriver, and pull the lamp body towards you.
NOTE
Do not turn the aiming adjusting bolt (3).
Remove the connector secured at the bracket.
Undo the lamp cover while pressing on the lugs, then disconnect the connector.
Unhook the spring which secures the bulb and then remove the bulb.
CAUTION
Never hold the halogen lamp bulb with a bare hand, dirty glove, etc. The oil from your hand could cause the bulb to break the next time the front fog lamps are operated. If the glass surface is dirty, it must be cleaned with alcohol, paint thinner, etc., and refit after drying it thoroughly.
See also:
To operate using the keyless operation function
Locking the doors and tailgate
When you are carrying the keyless operation key, if you press the driver’s or
front passenger’s door lock/unlock switch (A), or the tailgate LOCK switch (B) withi ...
Power steering fluid
To check the fluid level
Check the fluid level in the reservoir while the engine is idling.
Check to make certain that the power steering fluid level is always between the
“MAX” and “MIN” ...
Steering wheel audio remote control switches
The remote control switch is located on the left side of the steering wheel.
It can be used when the ignition switch or the operation mode is in ON or ACC.
1- Volume up button
2- Volume down butt ...