Spot lamps

Insert a straight blade (or minus) screwdriver into the notch of the lamp assembly and pry gently to remove the lens.
Remove the bulb from the lamp holder.
NOTE
Wrap a piece of cloth around the straight blade (or minus) screwdriver in order to avoid scratching the lens.

See also:
Engine coolant
A translucent coolant reserve tank is located in the engine compartment. The
coolant level in this tank should be kept between the two marks on the reserve tank
when measured while the engine is ...
Starting
Tips for starting
• Do not operate the starter motor continuously longer than 10 seconds; doing
so could run down the battery. If the engine does not start, turn the ignition switch
back to “ ...
To unfasten
Hold the latch plate and push the button on the buckle.
Note
► As the belt retracts automatically, keep holding the latch plate while retracting
so that the belt stows slowly. Failure to ...
