Selection of engine oil (petrol-powered vehicle)
(1) Select engine oil of the proper SAE viscosity number according to the atmospheric
temperature. For 0W-30, 5W-30, 0W-40 and 5W-40 viscosity grade, use only ACEA A3
classification.
(2) Use engine oil conforming to the following classification:
- ACEA classification: “For service A1, A2 or A3”
- API classification: “FOR SERVICE SG” or higher
NOTE
Use of additives is not recommended since they may reduce the effectiveness of additives already included in the engine oil. It may result in failure of the mechanical assembly.
See also:
Average fuel consumption display
This displays the average fuel consumption from the last reset to the present
time.
There are the following 2 mode settings.
For information on how to change the average fuel consumption display s ...
Cigarette lighter
The cigarette lighter can be used while the ignition switch or the operation
mode is in ON or ACC.
1- Push all the way in.
The cigarette lighter will automatically return to its original positio ...
Doors
Caution
► Make sure the doors are closed: driving with doors not completely closed
is dangerous.
► Never leave children in the vehicle unattended.
► Be careful not to lock the ...