Wheel condition
1- Location of tread wear indicator
2- Tread wear indicator
Check the tyres for cuts, cracks and other damage. Replace the tyres if there are deep cuts or cracks. Also check each tyre for pieces of metal or pebbles.
The use of worn tyres can be very dangerous because of the greater chance of skidding or hydroplaning. The tread depth of the tyres must exceed 1.6 mm in order for the tyres to meet the minimum requirement for use.
If there are tread wear indicators on the tyres, they will appear in six places on the surface of the tyre as the tyre wears, thereby indicating that the tyre no longer meets the minimum requirement for use. When these wear indicators do appear, the tyres must be replaced with new ones.
Be sure that the wheel nuts are tightened correctly. Refer to the section entitled “For emergencies” for information concerning replacement of the tyres.
NOTE
The mark and the location of the tyre tread wear indicators are different depending on tyre manufacturers.
See also:
To play tracks from USB device
You can connect your iPod or USB memory device to the USB input terminal and
play music files stored in the iPod or USB memory device.
See the following section for the types of connectable devices ...
Sunglasses pocket
To open, pull the lever. ...
Mark display screen (when the ignition switch is “OFF”)
If you press the multi-information meter switch and return from the warning display
screen to the previous screen, the mark is displayed.
Refer to “To return to the screen displayed before the ...