Specifications

See also:

Changing a fuse
1. Before replacing a fuse, always turn off the electrical circuit concerned and turn the ignition key to the “LOCK” position. 2. Remove the fuse box cover. 3. Referring to the fuse load cap ...

Setting the system
1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...

Towing
Your vehicle may be towed either by another vehicle with a rope, or by a tow truck. The regulations concerning towing may differ from country to country. It is recommended that you obey the regul ...