To operate without using the keyless operation functionTo operate without using the keyless operation function  - Keyless operation system - Locking and unlocking - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Emergency key

The emergency key is built into the keyless operation key. If the keyless operation function cannot be used, for example because the keyless operation key battery has worn out or the vehicle battery is flat, you can lock and unlock the doors and start the engine with the emergency key. To use the emergency key (1), unlock the lock knob (2) and remove it from the keyless operation key (3).

Note

► Only use the emergency key for emergencies. Note

► Only use the emergency key for emergencies.

If the keyless operation key battery wears out, replace it as quickly as possible so that you can use the keyless operation key.

► After using the emergency key, always return it into the keyless operation key.

    See also:

    Selector positions
    P - PARK This position locks the transmission to prevent the vehicle from moving. The engine can be started in this position. R - REVERSE Move the lever to this position only after the vehicle ha ...

    Warning lamps
    Brake warning lamp This lamp will illuminate for a few seconds when the ignition switch is turned to the “ON” position. A warning is also displayed on the multi-information display. With the i ...

    Brake fluid/Clutch fluid
    The brake fluid and the clutch fluid share the reservoir tank. ...