Ignition switch
To prevent vehicle theft, only the emergency key with the preregistered keyless operation key inserted can start the engine. (Electronic immobilizer function) Also refer to “Starting and driving: Starting the engine” on pages 4-15, 4-16.
LOCK
The engine is stopped and the steering wheel locked. The emergency key can be inserted and removed in this position.
ACC
The engine is stopped, but the audio system and other electric devices can be operated.
ON
The engine is running, and all the vehicle’s electrical devices can be operated.
START
The starter motor operates. After the engine has started, release the emergency key and it will automatically return to the “ON” position.
Note
► The keyless operation key is equipped with an electronic immobilizer. To start the engine, the ID code which the transponder inside the key sends must match the one registered in the immobilizer computer. Refer to “Electronic immobilizer (Anti-theft starting system)”.
See also:
Passenger compartment (LHD vehicles)
The fuse blocks in the passenger compartment are located behind the fuse lid
in front of the driver’s seat at the position shown in the illustration.
A- Main fuse block
B- Sub fuse block
1. O ...
Rear window wiper and washer
The rear window wiper and washer switch can be operated with the ignition switch
or the operation mode in ON or ACC.
INT- The wiper operates continuously for several seconds then operates intermi ...
Digital clock
Automatic mode and manual mode is available for digital clock adjustment.
Select the automatic mode or the manual mode by performing the following operations:
A- PWR switch
B- TUNE switch
1. Pre ...