When turning from “LOCK” to “ACC”When turning from “LOCK” to “ACC” - Keyless operation system - Locking and unlocking - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

1. Take the emergency key out of the keyless operation key. Refer to “Emergency key”.
2. Remove the ignition switch cover while pressing the lock release button (A).

3. Insert the emergency key into the ignition switch and turn slowly while pushing.

3. Insert the emergency key into the ignition switch and turn slowly while pushing.

Note

► If the ignition switch will not turn from the “LOCK” to the “ACC” position, Note

► If the ignition switch will not turn from the “LOCK” to the “ACC” position, lightly turn the steering wheel right and left while turning the ignition switch.

    See also:

    Interior
    The three-row Outlander is an athletic crossover that Mitsubishi says can seat up to seven people. (Insert raucous laughter here.) Not even a family of clowns could fit seven people in this car. M ...

    Bonnet
    To open Pull the release lever towards you to unlock the bonnet. Raise the bonnet while pressing the safety lock. NOTE Only open the bonnet when the wipers are in the parked position. Failure ...

    How to connect an iPod
    1. Park your vehicle in a safe place and turn the ignition switch to the “LOCK” position. 2. Open the USB input terminal cover (A) in the glove box. 3. Connect the Dock connector (C) to the ...