Using the MIVEC engine
The MIVEC engine automatically controls valve timing in accordance with driving conditions for maximum engine performance.
Note
► To protect the engine, the high-speed mode may not be selected while the engine coolant temperature is low.
11. Remove the keyless operation key from the emergency key.
Warning
► Make sure to remove the keyless operation key from the emergency key after
the engine is started.
If not removed, the keyless operation key could fall to the floor, which could disturb
the pedal operation. Furthermore, the keyless operation key could prevent the driver’s
knee airbag from inflating normally or could be propelled to cause serious injury
if the airbag inflates.
Note
► If the emergency key is attached to a key holder, it may become impossible to insert the keyless operation key into the emergency key, and it may prevent the engine from being started.
When using the emergency key to start the engine, first remove the key from the key ring.
See also:
Type 1 (Vehicles equipped with the central door lock switch)
Note
► Each of the doors can be locked or unlocked independently by using the inside
lock knob.
► When locking or unlocking with the key on the driver’s door, only the driver’s
...
Air flow and direction adjustments
Centre ventilators
Move the knob (A) to make adjustments.
To close the ventilator, move the knob (A) to the inside as far as possible.
1- Close
2- Open
Side ventilators
Move the knob (A) to ma ...
Installing a child restraint system to a 3-point type seat belt (with emergency/automatic
locking mechanism)
The 3-point type seat belts at the seat positions above can be converted from
normal emergency locking retractor (ELR) mode to automatic locking retractor (ALR)
mode. It must be so converted, wh ...