To unlockTo unlock  - Keyless entry system - Keyless operation system - Locking and unlocking - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Press the UNLOCK switch (2). All the doors and the rear hatch will be unlocked. If the front room lamp switch (if so equipped) is in the “DOOR” position or the rear room lamp switch (except for vehicles equipped with the sunroof) is in the middle (•) position at this time, the room lamp will come on for approximately 15 seconds and the turn-signal lamps will blink twice.

Except for vehicles for Russia, Kazakhstan and Ukraine, the position and tail lamps can also be set to turn on for about 30 seconds.

Refer to “Instruments and controls: Welcome light”.

► For vehicles equipped with the central door lock switch, the door and rear Note

► For vehicles equipped with the central door lock switch, the door and rear hatch unlock function can be set so that only the driver’s door unlocks when the UNLOCK switch (2) is pressed once.

If the door and rear hatch unlock function is set to work as described above, all the doors and the rear hatch unlock when the UNLOCK switch is pressed two times in succession.

Refer to “Setting of door and rear hatch unlock function”.

    See also:

    Map lamps
    Push the lens (A) to turn on the lamp. Push it again to turn it off. ...

    Type 1 (Vehicles equipped with the central door lock switch)
    Note ► Each of the doors can be locked or unlocked independently by using the inside lock knob. ► When locking or unlocking with the key on the driver’s door, only the driver’s ...

    Changing the fuel consumption display unit
    The display unit for fuel consumption can be switched. The distance, speed, and amount units are also switched to match the selected fuel consumption unit. 1. Press and hold the multi-information ...