Operation of the Dead Lock SystemOperation of the Dead Lock System - Keyless entry system - Keyless operation system - Locking and unlocking - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

In a vehicle that has a Dead Lock System, it is possible to set the Dead Lock System using the remote controller. (Refer to “Dead Lock System”.)

    See also:

    High–mounted stop lamp
    Hatchback Place the groove of clip top as shown, then remove the cover. Undo bolts (A), remove the lamp body, and disconnect the connector. Undo screws (B) and take the bulb out of its socket ...

    Setting the system
    1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...

    Deployment of front air bags
    The front air bags ARE DESIGNED TO DEPLOY when... The front air bags are designed to deploy when the vehicle suffers a moderate to severe frontal impact. Typical conditions are shown in the illus ...