The security alarm has four modes
See also:
Stop and tail lamps and rear turn-signal lamps
1. Insert a straight blade (or minus) screwdriver with the end covered with a
cloth or other object at the edge of the cover and pry gently to remove the cover.
2. Remove the socket and bulb asse ...
Reversing sensor system warning display
In case there is a malfunction in the reversing sensor system, the display for
the malfunctioning sensor will blink and the warning buzzer will sound for approximately
5 seconds. Even after the bu ...
Warning lamps
Brake warning lamp
This lamp illuminates when the ignition switch is turned to the “ON” position
or the operation mode is put in ON, and goes off after a few seconds.
Always make sure that t ...
