Alarm activationAlarm activation - Security alarm system - Locking and unlocking - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

When the system is in the system armed mode, the alarm will be activated as follows if the vehicle is unlocked or if any of the doors, rear hatch or bonnet is opened using a method other than the keyless entry system or the keyless operation function.

1. The alarm will be activated for approximately 30 seconds. The turn-signal lamps will blink, and the siren will sound intermittently.

2. The alarm will resume if unlawful actions are taken again, even if the alarm

2. The alarm will resume if unlawful actions are taken again, even if the alarm has stopped.

► During an alarm operation, the alarm is displayed on the information screen Note

► During an alarm operation, the alarm is displayed on the information screen in the multiinformation display.

Cancelling the alarm

    See also:

    The Inside
    The crossover's uncluttered dashboard sweeps across the front of the cabin, broken up only by the instrument hood. The dash panels are made of hard plastic, but they have nice graining and don't l ...

    Changing the detection areas
    The detection areas can be changed as follows: Vehicles with a towing bar While the operation of the system is stopped at the “SONAR” switch, push the “SONAR” switch approximately 3 second ...

    Oil pressure warning display
    If the engine oil pressure drops while the engine is running, the warning display is displayed on the information screen in the multi-information display. Caution ► If the vehicle is driv ...