Manual typeManual type  - To recline the seatback - Front seat - Seat and seat belts - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

In order to recline the seatback, lean forward slightly, pull the seatback lock lever up, and then lean backward to the desired position and release the lever.

The seatback will lock in that position.

Caution

► The reclining mechanism of the seatback is spring loaded, causing it to Caution

► The reclining mechanism of the seatback is spring loaded, causing it to return to the vertical position when the lock lever is operated. When using the lever, sit close to the seatback or hold it with your hand to control its return motion.

    See also:

    Wheel condition
    1- Location of tread wear indicator 2- Tread wear indicator Check the tyres for cuts, cracks and other damage. Replace the tyres if there are deep cuts or cracks. Also check each tyre for pieces ...

    Leg area heating
    Set the mode selection dial to the position shown in the illustration and set the air selection switch (A) to the outside position. Adjust the temperature by turning the temperature control dial ...

    Ignition switch
    In order to prevent theft, the engine will not start unless a preregistered keyless operation key is used. (Engine immobilizer function) LOCK (PUSH OFF) The position in which the steering wheel ...