To unfastenTo unfasten  - 3-point type seat belt (with emergency locking mechanism) - Seat belts - Seat and seat belts - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Hold the latch plate and push the button on the buckle.

Note

► As the belt retracts automatically, keep holding the latch plate while retracting Note

► As the belt retracts automatically, keep holding the latch plate while retracting so that the belt stows slowly. Failure to do this could damage the vehicle.

    See also:

    Passenger’s switches
    The passenger’s switches can be used to operate the corresponding passenger’s door windows. Press the switch down for operating the window, and pull up the switch for closing. Note ► ...

    Driver’s seat belt warning lamp and display
    Warning lamp A tone and warning lamp are used to remind the driver to fasten the seat belt. If the ignition switch is turned to the “ON” position or the operation mode is put in ON while a ...

    Clutch fluid
    Petrol-powered vehicle To check the clutch fluid To check the clutch fluid The clutch fluid in the master cylinder should be checked when performing other underhood services. In addition, the syst ...