Installing a child restraint system to the lower anchorage (ISOFIX child restraint mountings) and tether anchorageInstalling a child restraint system to the lower anchorage (ISOFIX child restraint mountings) and tether anchorage - Child restraint - Seat and seat belts - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Seat and seat belts / Child restraint / Installing a child restraint system to the lower anchorage (ISOFIX child restraint mountings) and tether anchorage

See also:

Brake warning lamp
This lamp illuminates when the ignition switch is turned to the “ON” position, and goes off after a few seconds. Always make sure that the lamp goes off before driving. With the ignition swi ...

Rear fog lamp switch
The rear fog lamp can be operated when the headlamps or front fog lamps (if so equipped) turn on. Push the switch to turn on the gear fog lamp, and push the switch again to turn it off. The ind ...

To remove the spare tyre
1. Lift up the board. 2. To remove the spare tyre, remove the installation clamp (A) by turning it anticlockwise. Note ► Put the spare wheel under the vehicle body near the jack. This make ...