To install
1. Remove any foreign material in or around the connectors and ensure the vehicle
seat belt is in its normal storage position.
2. Push the child restraint system’s connectors (A) into the slit (B) in accordance
with the instructions provided by the child restraint system’s manufacturer.
A- Connector
B- Slit
C- Vehicle seatback
D- Vehicle seat cushion
E- Lower anchorage
If your child restraint system requires the use of a tether strap, fasten the tether strap in accordance with steps 3 through 4.
3. Remove the head restraint from the location in which you wish to install a
child restraint.
4. Latch the top tether strap hook (F) of the child restraint system to the tether
anchorage bar (G) and tighten the top tether anchorage strap so it is securely fastened.
5. Push and pull the child restraint system in all directions to be sure it is firmly secured.
See also:
Normal conditions
The starting procedure is as follows :
1. Insert the ignition key and fasten the seat belt. 2. Apply the parking brake.
3. Depress and hold the brake pedal. 4. Place the gearshift lever (manual tra ...
2024 Mitsubishi Outlander PHEV boasts an impressive daily range
Mitsubishi Outlander PHEV (2024) boasts an impressive daily
range, alleviating concerns about frequent charging. With regular overnight
charging, the engine may only be needed during extended ro ...
Security alarm system
The security alarm system is for alerting the surrounding area of suspicious
behaviour to prevent unlawful entry into the vehicle by operating an alarm if a
door, the tailgate or the bonnet is ope ...