SRS warning lamp/display
Warning lamp
If there is an error in the system, the warning lamp will come on and the warning display will appear on the information screen in the multi-information display.
Under normal conditions, the warning lamp comes on when the ignition switch is turned to the “ON” position and goes off a few seconds later.
The warning lamp will also come on and remain on when the SRS airbags and the seat belt pretensioner system have been activated.
The warning lamp/display is used for both SRS airbag warnings and seat belt pretensioner system warnings.
Warning
► There may be a system error if the warning lamp/display appears as indicated.
In such cases, an SRS airbag or a seat belt pretensioner system may not function
properly in a collision. Have your vehicle checked by a MITSUBISHI MOTORS Authorized
Service Point.
• Even when the ignition switch is in the “ON” position, the warning lamp does not
come on or it remains on a few seconds later
• The warning lamp comes on while driving
• The warning display appears while driving
See also:
To play tracks from USB device
You can connect your iPod or USB memory device to the USB input terminal and
play music files stored in the iPod or USB memory device.
See the following section for the types of connectable devices ...
Headlamps
Unhook the spring which secures the bulb, and then remove the bulb.
CAUTION
Never hold the halogen lamp bulb with a bare hand, dirty glove, etc. The
oil from your hand could cause the bulb to ...
Operating a music player connected via Bluetooth®
For the operation of a music player connected via Bluetooth®, refer to “To play
tracks from a Bluetooth ® device”. ...