Instruments and controlsInstruments and controls  - Multi-information display - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

► The fuel units, temperature units, display language, and other settings can Note

► The fuel units, temperature units, display language, and other settings can be changed.
Refer to “Changing the function settings (when the ignition switch is “ON”)”.
► The display screen is different depending on whether the ignition switch is “OFF” or “ON”.

    See also:

    Ignition switch turn-off reminder system
    When the ignition switch is in any position other than the “LOCK” (PUSH OFF) position, if you close all the doors and the rear hatch then try to lock the doors and rear hatch by pressing the ...

    Front fog lamps (Type 2)
    1. Remove the screw (A). 2. Pull the cover out in the direction of the arrow shown in the illustration. 3. Remove the screws (B) and pull the entire lamp unit out. Note ► When unfaste ...

    Starting the engine (petrol-powered vehicles)
    The starting procedure is as follows: 1. Fasten the seat belt. 2. Make sure the parking brake is applied. 3. Depress and hold the brake pedal. 4. Fully depress the clutch pedal. (M/T) Note υ ...