Mark display screen (when the ignition switch is “OFF”)Mark display screen (when the ignition switch is “OFF”) - Multi-information display - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Multi-information display / Mark display screen (when the ignition switch is “OFF”)

If you press the multi-information meter switch and return from the warning display

If you press the multi-information meter switch and return from the warning display screen to the previous screen, the mark is displayed.

Refer to “To return to the screen displayed before the warning” on page.

This mark is also displayed if there is another warning other than the one displayed.

When the cause of the warning display is eliminated, the mark goes out automatically.

► When the mark is displayed, the warning display screen can be redisplayed on Note

► When the mark is displayed, the warning display screen can be redisplayed on the information screen.
Refer to “Information screen (when the ignition switch is “OFF“)”.
Refer to “Information screen (when the ignition switch is “ON”)”.

    See also:

    For cold and snowy weather
    Ventilation slots The ventilation slots in front of the windscreen should be kept clear of leaves or brushed clear after heavy snowfall, so that the operation of the heating and ventilation syste ...

    Fuel consumption
    ...

    Warning lamp
    The ABS warning lamp should illuminate when the ignition switch is turned ”ON”, and should go off in a few seconds. CAUTION If the warning lamp stays on or does not illuminate when you start ...