Odometer/TripmeterOdometer/Tripmeter  - Multi-information display - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Each time you lightly press the multi-information meter switch, the display screen switches.

Odometer/Tripmeter → Service reminder → Redisplay of a → Odometer/Tripmeter warning display screen → Odometer/Tripmeter→ Service reminder → Redisplay of a warning display screen → Odometer/Tripmeter Odometer

Odometer

The odometer indicates the distance travelled.

Tripmeter

The tripmeter indicates the distance travelled between two points.

Example usage of tripmeter It is possible to measure two currently and tripmeter travelled distances, from home using tripmeter It is possible to measure two currently travelled distances, from home using tripmeter way using tripmeter . and from a particular point on the way using tripmeter To reset the tripmeter.

To reset the tripmeter

To return the display to 0, hold down the multi-information meter switch for about 2 seconds or more. Only the currently displayed value will be reset.

Example

If tripmeter tripmeter  will be reset. is displayed, only tripmeter will be reset.

Note

► If there is no warning display, the switching sequence is: Odometer/Tripmeter Note

► If there is no warning display, the switching sequence is: Odometer/Tripmeter → Odometer/ Tripmeter → Service reminder → Odometer/Tripmeter .
► Both tripmeters can count up to 9999.9 km (9999.9 miles). and When a tripmeter goes past 9999.9 km (9999.9 miles), it returns to 0.0 km (0.0 miles). can count up to 9999.9 km (9999.9 miles).
When a tripmeter goes past 9999.9 km (9999.9 miles), it returns to 0.0 km (0.0 miles).
► When disconnecting the battery terminal, the memories of tripmeter are erased, and their displays return display and display to 0.0 km (0.0 miles). are erased, and their displays return to 0.0 km (0.0 miles).

    See also:

    Windscreen wipers
    NOTE • To ensure a clear rearward view, the rear window wiper will automatically perform several continuous operations if the gearshift lever or the selector lever is put in the “R” positi ...

    If the vehicle breaks down
    If the vehicle breaks down on the road, move it to the shoulder and use the hazard warning flashers. If the engine stops/fails Vehicle operation and control are affected if the engine stops. Befor ...

    Driver’s and front passenger’s airbag system
    The driver’s airbag is located under the padded cover in the middle of the steering wheel. The front passenger’s airbag is contained in the instrument panel above the glove box. The driver’ ...