Interrupt display screen (when the ignition switch is “OFF”)
When there is information to be announced, such as lamp reminders, the buzzer sounds and the multiinformation display switches to the warning display screen. Refer to the appropriate page and take the necessary measures.
When the cause of the warning display is eliminated, the warning display goes out automatically.
Refer to “Warning display list (when the ignition switch is “OFF”)”.
1- Information generated
2- Cause eliminated
To return to the screen displayed before the warning display
Even if the cause of the warning display is not eliminated, you can return to the screen that was displayed before the warning display.
If you press the multi-information meter switch, the display screen switches to the screen that was displayed before the warning display and the mark (A) is displayed.
Note
► Warning display screens with a
or mark displayed in the upper right
of the screen can be switched. If you want to switch the display, press the multi-information
meter switch as follows.
: Press lightly.
: Press for about 2 seconds or more.
Redisplay of a warning display screen
When the mark is displayed, if you lightly press the multi-information meter switch a few times, the warning display screen you switched from is displayed again. Refer to “Information screen (when the ignition switch is “OFF“)”.
See also:
Selection of engine oil (petrol-powered vehicle)
(1) Select engine oil of the proper SAE viscosity number according to the atmospheric
temperature. For 0W-30, 5W-30, 0W-40 and 5W-40 viscosity grade, use only ACEA A3
classification. (2) Use eng ...
Driver’s knee airbag system
The driver’s knee airbag is located under the steering wheel. The driver’s knee
airbag is designed to deploy at the same time as the driver’s front airbag.
...
Warning lamps
Brake warning lamp
This lamp illuminates when the ignition switch is turned to the “ON” position
or the operation mode is put in ON, and goes off after a few seconds.
Always make sure that t ...