Selector lever position display screen (vehicles with CVT)/ Gearshift lever position display screen (vehicles with Twin Clutch SST)Selector lever position display screen (vehicles with CVT)/ Gearshift lever 
position display screen (vehicles with Twin Clutch SST)  - Multi-information display - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Shows the position of the selector lever or gearshift lever.

Shows the position of the selector lever or gearshift lever.

Refer to “Selector lever operation”.

Refer to “Gearshift lever position display”.

    See also:

    How to adjust the tone
    Press the AUDIO button (5) to select BASS - TREBLE - FADER - BALANCE Audio adjust mode off. BASS (Bass tone control) Press the audio adjust button (4) either or to select the desired bass tone ...

    Position lamps (except for vehicles equipped with high intensity discharge headlamps)
    1. For petrol-powered vehicles equipped with turbocharger, when replacing the bulb on the left side, remove the bolt (A) holding down the relay box and move the relay box towards the rear of the v ...

    Twin Clutch SST control mode
    Select the control mode from the following two types to suit the driving conditions. Note ► When continuously driving on closed circuit tracks or at other locations where the engine is op ...