Outside temperature display screenOutside temperature display screen  - Multi-information display - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

This shows the temperature outside the vehicle.

This shows the temperature outside the vehicle.

► The display setting can be changed to the preferred units (°C or °F). Note

► The display setting can be changed to the preferred units (°C or °F).
Refer to “Changing the function settings (when the ignition switch is “ON”)”.
► Depending on factors such as the driving conditions, the displayed temperature may vary from the actual outside temperature.

    See also:

    Rear room lamp
    When replacing the bulb, put the rear room lamp switch into the “OFF” position. 1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into the notch of the lamp assembly a ...

    To lock or unlock from inside the vehicle
    1- Lock 2- Unlock Pull the inside door handle towards you to open the door. Note ► The driver’s door can be opened without using the lock knob by pulling on the inside door handle. E ...

    Stop and tail lamps and rear turn-signal lamps
    1. Insert a straight blade (or minus) screwdriver with the end covered with a cloth or other object at the edge of the cover and pry gently to remove the cover. 2. Remove the socket and bulb asse ...