Changing the function settings (when the ignition switch is “ON”)
1. Stop the vehicle in a safe place.
Firmly apply the parking brake and put the gearshift lever into the “N” (Neutral) position (M/T), the selector lever into the “P” (PARK) position (CVT) or the gearshift lever into the “P” (PARK) position (Twin Clutch SST).
2. Lightly press the multi-information meter switch a few times to switch the information screen to the function setting screen. Refer to “Information display (when the ignition switch is “ON”)”.
Caution
► For safety, stop the vehicle before operating.
While driving, even if you operate the multi- information meter switch, the function
setting screen is not displayed.
3. Press and hold the multi-information meter switch for about 2 seconds or more to switch from the setting mode screen to the menu screen.
Note
► To return the menu screen to the function setting screen, press and hold the
multi-information meter switch for about 2 seconds or more.
► If no operations are made within about 15 seconds of the menu screen being displayed,
the display returns to the function setting screen.
4. Select the item to change on the menu screen and change to the desired setting. Refer to the following items for further details on the operation methods.
See also:
Buying a Mitsubishi Carisma
This is a bit of a difficult one, as there's not too much to worry about,
which is excellent news for you. So, provided you're buying a car with full
service history, you shouldn't be in for any n ...
Rear room lamp
The room lamp can be turned on by sliding the room lamp switch.
1 (ON) - The room lamp goes on.
2 ( ) - The lamp illuminates when a door or the rear hatch is opened. It goes
off about 15 seconds ...
Using the key on the driver’s door
Using the key on the driver’s door locks or unlocks all doors and rear hatch.
1- Lock
2- Unlock ...