Operation sound setting
You can turn off the operation sounds of the multiinformation meter switch and daytime dipper button.
1. Press and hold the multi-information meter switch for about 2 seconds or more to switch from the setting mode screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch is “ON”)”.
2. Lightly press the multi-information meter switch to select
(operation sound setting).
3. Press and hold the multi-information meter switch for about 2 seconds or more to switch in sequence from ON (operation sound on) → OFF (operation sound off) → ON (operation sound on).
The setting is changed to the selected condition.
Note
► The memory of the operation sound setting is erased if the battery is disconnected,
and it returns automatically to ON (operation sound on).
► The operation sound setting only deactivates the operation sound of the multi-information
meter switch and daytime dipper button. The warning display and other sounds cannot
be deactivated.
See also:
Seat belt inspection
• Check the belts for cuts, worn or frayed webbing and for cracked or deformed
metallic parts. Replace the belt assembly if it is defective.
• A dirty belt should be cleaned with neutral deterg ...
Cancelling the system
The following methods can be used to cancel the system when it is in the system
preparation mode or the system armed mode.
• Pressing the UNLOCK switch on the remote control switch.
• Turning ...
Vehicle labeling
Vehicle identification number
The vehicle identification number is stamped on the bulkhead as shown in the
illustration.
Vehicle information code plate
The vehicle information code plate is riv ...